Skip to main content

Events

In this tutorial, you'll learn about the events standard and how to implement it in your smart contract.

Understanding the use caseโ€‹

Have you ever wondered how the wallet knows which NFTs you own and how it can display them in the collectibles tab? Originally, an indexer used to listen for any functions calls starting with nft_ on your account. These contracts were then flagged on your account as likely NFT contracts.

When you navigated to your collectibles tab, the wallet would then query all those contracts for the list of NFTs you owned using the nft_tokens_for_owner function you saw in the enumeration tutorial.

The problemโ€‹

This method of flagging contracts was not reliable as each NFT-driven application might have its own way of minting or transferring NFTs. In addition, it's common for apps to transfer or mint many tokens at a time using batch functions. In addition, it's common for apps to transfer or mint many tokens at a time using batch functions.

The solutionโ€‹

A standard was introduced so that smart contracts could emit an event anytime NFTs were transferred, minted, or burnt. This event was in the form of a log. No matter how a contract implemented the functionality, an indexer could now listen for those standardized logs. This event was in the form of a log. No matter how a contract implemented the functionality, an indexer could now listen for those standardized logs.

As per the standard, you need to implement a logging functionality that gets fired when NFTs are transferred or minted. In this case, the contract doesn't support burning so you don't need to worry about that for now. In this case, the contract doesn't support burning so you don't need to worry about that for now.

It's important to note the standard dictates that the log should begin with "EVENT_JSON:". The structure of your log should, however, always contain the 3 following things: The structure of your log should, however, always contain the 3 following things:

  • standard: the current name of the standard (e.g. nep171)
  • version: the version of the standard you're using (e.g. 1.0.0)
  • event: a list of events you're emitting.

The event interface differs based on whether you're recording transfers or mints. The interface for both events is outlined below. The interface for both events is outlined below.

Transfer events:

  • Optional - authorized_id: the account approved to transfer on behalf of the owner.
  • old_owner_id: the old owner of the NFT.
  • new_owner_id: the new owner that the NFT is being transferred to.
  • token_ids: a list of NFTs being transferred.
  • Optional - memo: an optional message to include with the event.

Minting events:

  • owner_id: the owner that the NFT is being minted to.
  • token_ids: a list of NFTs being transferred.
  • Optional - memo: an optional message to include with the event.

Examplesโ€‹

In order to solidify your understanding of the standard, let's walk through three scenarios and see what the logs should look like.

Scenario A - simple mintโ€‹

In this scenario, Benji wants to mint an NFT to Mike with a token ID "team-token" and he doesn't include a message. The log should look as follows. The log should look as follows.

EVENT_JSON:{
  "standard": "nep171",
  "version": "1.0.0",
  "event": "nft_mint",
  "data": [
    {"owner_id": "mike.testnet", "token_ids": ["team-token"]}
  ]
}

Scenario B - batch mintโ€‹

In this scenario, Benji wants to perform a batch mint. He will mint an NFT to Mike, Damian, Josh, and Dorian. Dorian, however, will get two NFTs. Each token ID will be "team-token" followed by an incrementing number. The log is as follows.

EVENT_JSON:{
  "standard": "nep171",
  "version": "1.0.0",
  "event": "nft_mint",
  "data": [
    {"owner_id": "mike.testnet", "token_ids": ["team-token0"]},
    {"owner_id": "damian.testnet", "token_ids": ["team-token1"]},
    {"owner_id": "josh.testnet", "token_ids": ["team-token2"]}
    {"owner_id": "dorian.testnet", "token_ids": ["team-token3", "team-token4"]},
  ]
}

Scenario C - transfer NFTsโ€‹

In this scenario, Mike is transferring both his team tokens to Josh. The log should look as follows. The log should look as follows.

EVENT_JSON:{
  "standard": "nep171",
  "version": "1.0.0",
  "event": "nft_transfer",
  "data": [
    {"old_owner_id": "mike.testnet", "new_owner_id": "josh.testnet", "token_ids": ["team-token", "team-token0"], "memo": "Go Team!"}
  ]
}
  ]
}

Modifications to the contractโ€‹

At this point, you should have a good understanding of what the end goal should be so let's get to work! Open the repository and create a new file in the nft-contract-basic/src directory called events.rs. This is where your log structs will live.

If you wish to see the finished code of the events implementation, that can be found on the nft-contract-events folder.

Creating the events fileโ€‹

Copy the following into your file. Copy the following into your file. This will outline the structs for your EventLog, NftMintLog, and NftTransferLog. In addition, we've added a way for EVENT_JSON: to be prefixed whenever you log the EventLog. In addition, we've added a way for EVENT_JSON: to be prefixed whenever you log the EventLog.

This requires the serde_json package which you can easily add to your nft-contract-skeleton/Cargo.toml file:

Adding modules and constantsโ€‹

Now that you've created a new file, you need to add the module to the lib.rs file. In addition, you can define two constants for the standard and version that will be used across our contract. In addition, you can define two constants for the standard and version that will be used across our contract.

Logging minted tokensโ€‹

Now that all the tools are set in place, you can now implement the actual logging functionality. Since the contract will only be minting tokens in one place, open the nft-contract-basic/src/mint.rs file and navigate to the bottom of the file. This is where you'll construct the log for minting. Anytime someone successfully mints an NFT, it will now correctly emit a log.

Logging transfersโ€‹

Let's open the nft-contract-basic/src/internal.rs file and navigate to the internal_transfer function. This is the location where you'll build your transfer logs. Whenever an NFT is transferred, this function is called and so you'll correctly be logging the transfers.

This solution, unfortunately, has an edge case which will break things. This solution, unfortunately, has an edge case which will break things. If an NFT is transferred via the nft_transfer_call function, there's a chance that the transfer will be reverted if the nft_on_transfer function returns true. Taking a look at the logic for nft_transfer_call, you can see why this is a problem. Taking a look at the logic for nft_transfer_call, you can see why this is a problem.

When nft_transfer_call is invoked, it will:

  • Call internal_transfer to perform the actual transfer logic.
  • Initiate a cross-contract call and invoke the nft_on_transfer function.
  • Resolve the promise and perform logic in nft_resolve_transfer.
    • This will either return true meaning the transfer went fine or it will revert the transfer and return false.

Let's open the nft-contract/src/internal.rs file and navigate to the internal_transfer function. This is the location where you'll build your transfer logs. Whenever an NFT is transferred, this function is called and so you'll correctly be logging the transfers. If you only place the log in the internal_transfer function, the log will be emitted and the indexer will think that the NFT was transferred. If the transfer is reverted during nft_resolve_transfer, however, that event should also be emitted. Anywhere that an NFT could be transferred, we should add logs. Replace the nft_resolve_transfer with the following code. Anywhere that an NFT could be transferred, we should add logs. Replace the nft_resolve_transfer with the following code.

In addition, you need to add an authorized_id and memo to the parameters for nft_resolve_transfer as shown below.

tip

We will talk more about this authorized_id in the following chapter.

The last step is to modify the nft_transfer_call logic to include these new parameters:

With that finished, you've successfully implemented the events standard and it's time to start testing.

Deploying the contractโ€‹

For the purpose of readability and ease of development, instead of redeploying the contract to the same account, let's create an account and deploy to that instead. For the purpose of readability and ease of development, instead of redeploying the contract to the same account, let's create an account and deploy to that instead. You could have deployed to the same account as none of the changes you implemented in this tutorial would have caused errors.

Deploymentโ€‹

Next, you'll deploy this contract to the network.

export EVENTS_NFT_CONTRACT_ID=<accountId>
near account create-account sponsor-by-faucet-service $EVENTS_NFT_CONTRACT_ID autogenerate-new-keypair save-to-legacy-keychain network-config testnet create

Using the cargo-near, deploy and initialize the contract as you did in the previous tutorials:

cargo near deploy $EVENTS_NFT_CONTRACT_ID with-init-call new_default_meta json-args '{"owner_id": "'$EVENTS_NFT_CONTRACT_ID'"}' prepaid-gas '100.0 Tgas' attached-deposit '0 NEAR' network-config testnet sign-with-keychain send

Mintingโ€‹

Next, you'll need to mint a token. Next, you'll need to mint a token. By running this command, you'll mint a token with a token ID "events-token" and the receiver will be your new account. In addition, you're passing in a map with two accounts that will get perpetual royalties whenever your token is sold. In addition, you're passing in a map with two accounts that will get perpetual royalties whenever your token is sold.

near contract call-function as-transaction $EVENTS_NFT_CONTRACT_ID nft_mint json-args '{"token_id": "events-token", "metadata": {"title": "Events Token", "description": "testing out the new events extension of the standard", "media": "https://bafybeiftczwrtyr3k7a2k4vutd3amkwsmaqyhrdzlhvpt33dyjivufqusq.ipfs.dweb.link/goteam-gif.gif"}, "receiver_id": "'$EVENTS_NFT_CONTRACT_ID'"}' prepaid-gas '100.0 Tgas' attached-deposit '0.1 NEAR' sign-as $EVENTS_NFT_CONTRACT_ID network-config testnet sign-with-legacy-keychain send

You can check to see if everything went through properly by looking at the output in your CLI:

Doing account.functionCall()
Receipts: F4oxNfv54cqwUwLUJ7h74H1iE66Y3H7QDfZMmGENwSxd, BJxKNFRuLDdbhbGeLA3UBSbL8UicU7oqHsWGink5WX7S
    Log [events.goteam.examples.testnet]: EVENT_JSON:{"standard":"nep171","version":"1.0.0","event":"nft_mint","data":[{"owner_id":"events.goteam.examples.testnet","token_ids":["events-token"]}]}
Transaction Id 4Wy2KQVTuAWQHw5jXcRAbrz7bNyZBoiPEvLcGougciyk
To see the transaction in the transaction explorer, please open this url in your browser
https://testnet.nearblocks.io/txns/4Wy2KQVTuAWQHw5jXcRAbrz7bNyZBoiPEvLcGougciyk
''

You can see that the event was properly logged!

Transferringโ€‹

You can now test if your transfer log works as expected by sending benjiman.testnet your NFT.

near contract call-function as-transaction $EVENTS_NFT_CONTRACT_ID nft_transfer json-args '{"receiver_id": "benjiman.testnet", "token_id": "events-token", "memo": "Go Team :)", "approval_id": 0}' prepaid-gas '100.0 Tgas' attached-deposit '1 yoctoNEAR' sign-as $EVENTS_NFT_CONTRACT_ID network-config testnet sign-with-legacy-keychain send

This should return an output similar to the following:

Doing account.functionCall()
Receipts: EoqBxrpv9Dgb8KqK4FdeREawVVLWepEUR15KPNuZ4fGD, HZ4xQpbgc8EfU3PiV72LvfXb2f3dVC1n9aVTbQds9zfR
    Log [events.goteam.examples.testnet]: Memo: Go Team :)
    Log [events.goteam.examples.testnet]: EVENT_JSON:{"standard":"nep171","version":"1.0.0","event":"nft_transfer","data":[{"authorized_id":"events.goteam.examples.testnet","old_owner_id":"events.goteam.examples.testnet","new_owner_id":"benjiman.testnet","token_ids":["events-token"],"memo":"Go Team :)"}]}
Transaction Id 4S1VrepKzA6HxvPj3cK12vaT7Dt4vxJRWESA1ym1xdvH
To see the transaction in the transaction explorer, please open this url in your browser
https://testnet.nearblocks.io/txns/4S1VrepKzA6HxvPj3cK12vaT7Dt4vxJRWESA1ym1xdvH
''

Hurray! Hurray! At this point, your NFT contract is fully complete and the events standard has been implemented.

Conclusionโ€‹

Today you went through the events standard and implemented the necessary logic in your smart contract. Today you went through the events standard and implemented the necessary logic in your smart contract. You created events for minting and transferring NFTs. You then deployed and tested your changes by minting and transferring NFTs. You then deployed and tested your changes by minting and transferring NFTs.

In the next tutorial, you'll look at the basics of a marketplace contract and how it was built.

Versioning for this article

At the time of this writing, this example works with the following versions:

  • rustc: 1.77.1
  • near-cli-rs: 0.11.0
  • cargo-near 0.6.1
  • NFT standard: NEP171, version 1.0.0
  • Events standard: NEP297 extension, version 1.1.0
Was this page helpful?
Need some help? Chat with us or check our Dev Resources!
Twitter
Telegram
Discord
Zulip
Edit this page
Last updated on by Github Actions